We’ve just produced a bespoke branding iron for a customer who makes rifle stocks. He asked for a really simple logo to be drawn out and laser cut – he brought the sketch in on a post it note so I could draw it on the computer there and then. Once the piece had been laser cut, I forged the handle from 8 mm round bar, with a long taper to weld to the back of the tiny laser cut brand. We tested it out on an offcut of timber we had in the workshop, see above! A personalised branding iron would make a fantastic & unique gift for a woodworker of any kind.
A local fabrications company recently got in touch as they knew we have done a lot of gilding for our weathervanes. They were doing a large restoration job for a church, including all of the railings and this finial which sits on top of the spire. The finial is clearly very old; the centre part being wrought iron but a lot of the scroll work being more recent repairs done in mild steel. We collected the finial from the company once the welding work was complete, and have had it electroplated and powdercoated, before applying several layers of paint to give it a very solid, non porous base to apply the size & gold leaf to. I’ve used extra thick 23.75 carat gold leaf so it’s suitable for the exposed location it will be situated. The photo above shows me brusing off any excess gold leaf bfore the job was finished.
Our Border Collie weathervane just about to be packaged and sent out. The customer wanted us to show some of the detail of their dog’s markings, but wasn’t too keen when I suggested cutting them out, so I have painted them instead! Looks great, and will stand out better than cut outs would. We could paint the markings of any collie if a photo is provided – a fantastic way to personalise a weathervane.
A bespoke swinging sign we sent out this week with a design to reflect the property’s history! Our customer lives on a farm in a converted barn that used to be a puppet theatre when the farm was a childrens farm, and he contacted us with a sketch showing his idea. It was very good drawing actually; it looked great on paper but there was a bit of work to do in turning the puppets into silhouettes and making the design function in laser cut steel. I made a few minor alterations and added a couple of improvements to the design but this one is largely the customer’s work.
A photo showing two of a set of bespoke flower stands we’ve made this week. This idea is that the central column will be filled with oasis and the display will work outwards from there. There are two candelabra platforms holding a total of 14 candle dishes; I can imagine these looking pretty spectacular when decorated. We put a lot of work in to them though and it almost seems a shame that the steel frame will be hidden!
Our customer had a pretty clear idea of what they were after, so we just needed to create a functioning final design for the stands and then make a prototype, which we did a few weeks ago. They loved the look of this first stand, and the only issue with it was the weight, as once it’s full of soaked oasis it will be very heavy. So in order to reduce this, we’ve cut the base from thinner steel, and cut holes in the platforms to try and save a little bit more as it all adds up. These still weigh a fair bit but are considerably lighter than the prototype so should be much easier to work with. Look forward to seeing photos of them decorated!
We’ve recently been asked to create two fish weathervanes; first a Grayling and then a Marlin. Both were gifts for our customer’s fishermen husbands. We didn’t want to have the laser cut fish welded flat on the bar as is the style with most of our weathervanes, so it took a bit of work finding the best way to show off a distinctive fish profile while making a functioning weathervane. After a bit of trial and error, we’ve ended up with the tube being welded into the body of the fish, which is raised well above the arrow bar. Really happy with how they have turned out! These will both be available to buy in our online shop as soon as I have time to update the website:
We can create weathervane designs based on any fish at no extra cost – please contact us on 0161 6814293 to discuss your ideas.