Bespoke House Sign

An interesting project we’ve been working on recently is this sign for a cottage in Cornwall. It is written into the deeds of the house that this sign must remain on the front of the property above the door, and given that it has been up for many years in a coastal location, many parts of the house sign had given in to rust, and the multiple layers of paint had taken away the sharpness of the design. The image below shows a close up of the old sign.Close up of rusty signInitially the customer had asked us to restore it, but given the fragility of the sign we felt we would be unable to do it justice, so decided it would be best all round to make an exact replica. So the first job was to photograph the sign, upload it onto the computer and trace the design. This was a lot more complex than it sounds, firstly because of the level of detail in the design, and secondly because of how the layers of paint had built up over the decades, some of this detail had been lost and as a result there was a little bit of guesswork involved. But after some minor alterations pointed out by the customer, we were ready to laser cut the house sign design. We’ve used 3mm steel, which is thicker than what was used originally so this should give it a longer lifespan.
The next stage was to fabricate the wavy scrolled border. We’ve used 13x3mm flat bar, which as far as I can tell is what was used initially. Though there was nothing difficult about the shapes we needed to forge, it took a lot of trial and error getting the full length of each piece to be the exact right size to all meet in the corners. I really enjoyed this process as it involved using the oxy propane torch which we don’t often have a reason to play with! photo of blacksmithing using an oxy propane torchWe have then drilled holes in the troughs for the rivets to fit through, plus corresponding holes in the hidden square bar frame, before welding all the pieces together and fixing the rivets in place.close up of metalwork  metalwork

Though parts of this job were fiddly and time consuming, we feel we’ve been sucessful in producing a replica that’s as close to the original as is possible. Here is the house sign all welded up and ready to be electroplated and powder coated.restored sign completeAnd the finished piece, ready for collection!House Sign Photo bespoke House Sign IMage

Leave a Reply

Your email address will not be published. Required fields are marked *


6 − four =

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>