A stunning candelabra we forged from an old reclaimed garden fork! The wooden handle had snapped off the fork, and the prongs were incredibly rusty so had been retired from the purpose it was originally intended. I’ve bent out the prongs in 4 different directions so it stands very stable, and I’ve curved the ends around forming the start of a decorative scroll. The texture was quite pitted due to the amount of rust and dirt covering the tool; some of this has smoothed out through being hammered at a yellow heat, but we didn’t want to lose all of it as we felt it added character to the Candelabra, and reminded you of it’s original use. The finish is just natural beeswax, applied when the piece was at a black heat.
Last week we designed and forged this boot scraper from 12 mm round bar. It’s long legs are designed to go at least a foot into the ground, therefore keeping it sturdy when in use. Each leg is welded to a piece of flat bar with a sharpened top edge. It was a little difficult making the two legs match, but pretty happy with how this has turned out. Not at all bad for something I drew in chalk on the workshop floor! This piece could easily be personalised; the central flat bar could be laser cut with any bespoke design as long as it’s still strong enough to be used, and any name or word could be punched into the metal when hot.