A bespoke swinging sign we produced recently for a Tattoo studio in North Wales. I loved this project; the company who commissioned it specialise in Celtic and Nordic tatto designs – their work is incredible. The laser cut design that forms the sign is the business logo – it’s translated perfectly into metalwork, very bold and eyecatching. The customer specified how they wanted the bracket to look, with a design involving three large hand forged scrolls, forming a roughly triangular shape to mirror the logo. I initially drew this out on the floor next to the forge, and bent the steel to follow this. I’ve used 12mm square bar so it’s relatively chunky. As the scrolls are quite tight, I needed a length of steel over 2 metres long to form the largest piece – this meant I needed a helper to stand behind me and support the long length while I heated and worked the end. We really enjoyed creating this piece, and the customer was very pleased with the result too. It’s great that we were able to reproduce the hand forged bracket exactly to the customer’s sketch, so their bespoke business sign is exactly as they wanted it.
We love the effect created by the lights behind this bespoke business sign! The piece is approx 120cm long, and the Manchester based company’s name is cut from it. I like the organic, hand drawn style of writing and the soft edges of the outer shape – I copied this on the computer using a graphics pen. The finish is a clear powder coat, which is really beautiful as it shows where the heat of the laser has lightly blued the steel when cutting the design. We’ve welded bits of steel on the back so it can be raised off the surface it’s mounted to, in order to fit the lights behind it. I think the lightbox effect works brilliantly, so is fantastic to see a photo of this bespoke piece insitu.
A lot of trial and error went into the design of this bespoke swinging sign. It was produced for a new B&B opening in Pembrokeshire, and the concept for the design was given to us by the customer. They had a pretty clear idea in mind of what they wanted which was helpful, though I found it challenging getting the shape of the wings to suit the curve of the circle, while also ensuring that there were enough contact points between the two that the dragon would be properly connected and not a weak point. The hint of rocks and waves at the bottom was an idea we had partly to give the dragons tail something to join to, but also to connect the sign to the location; we felt this would perfectly suit the dramatic, rocky scenery of the stunning Pembrokeshire coast.
The customer’s were delighted, and gave us the following feedback:
“Black Fox Metalcraft captured the essence of our dreams and future in the sign they designed and created for us. Awesome communication, simply wonderful artwork, lovely, genuine people. So proud every time we return home to see this. And such positive comments from all passers by too! Thanks Richard and Jenny for exceeding all our expectations!”
We recently produced this bespoke business sign for a Cattery in South Wales. The design is based on the business logo – to read about how we converted the logo to this striking, contemporary sign, and see photos from our workshop of the making process, check out our earlier blog post on the link below:
The customer has just sent in these photos of the sign insitu, it looks great! The design is very bold and it really stands out from a distance too, which is so important from a business point of view in terms of potential customers noticing you, and new customers being able to find the Cattery. We wish them all the best with their new venture.
We’ve just produced a large scale bespoke swinging sign for a Cattery in south wales. When the owner of the business contacted us, he sent an image of the Cattery logo as a basis for the design. Initially we weren’t at all sure how to approach this as it’s far more of a contemporary design than the style I naturally seem to draw in. Because the use of colour is part of what makes it such an effective piece of graphic design (something that we would not be able to replicate without painting it by hand, which due to the time it would take would make the sign prohibitively expensive), we did not know how sucessful it would be as a black and white silhouette. We tried a number of different ways of showing the interlocking circles but none seemed quite right, until we highlighted the edge of each shape; quite simple really but it took ages to get there!The photo below shows the business sign and it’s frame in our workshop; at this stage most of the welding work had been done, here we were just making sure the sign links fitted together nicely so the sign would hang straight. The bottom of the frame fixing does nearly touch the ceiling of the workshop! The frame is made from 60x60mm box section, so really chunky and heavy duty which adds to the high quality of the sign. It’s absolutely huge so will definitely stand out and be noticed.As with most of our hanging signs, the text is painted by hand to the customer’s specification. I’ve copied the text from the Cattery business logo, I really like painting Italic style fonts as the brush flows really nicely plus its good to have a change from the standard ‘Times New Roman’ every now and again. This photo shows the text at the primer stage – after this two coats of Ivory cream were applied to finish it.The customer is delighted with both the finished result and the process of working with us to create his bespoke business sign, which is fantastic to hear:
“I just wanted to let you know how absolutely delighted we are with the sign.
Throughout the process you guys have been an absolute pleasure to deal with …… your advice and patience during the design phase was appreciated, the sign itself has surpassed all expectations, it is stunning and is a reflection of true craftsmanship. I hope that Blackfox Metalcraft continues to be as successful as it deserves to be. Thanks again.”
We love this bespoke laser cut sign we produced recently! The customer contacted us with a clear idea in mind as to what they wanted their house sign to look like, and so with such a definite brief, the bespoke design was fairly straighforward.The markings on the Giraffe were a little complex to work out, as I’ve actually simplified it quite a bit so the laser cut design wouldn’t be too delicate, but we still wanted it to look realistic and not cartoony. The name Kisima means ‘watering hole’ in Swahili, and though I’m not sure of the significance of this for the customer, I love the design as it’s quite a contemporary style but with a traditional look to it.
A bespoke sign we produced at the end of last year, for the Black Metal Brewery based up in Edinburgh. The laser cut design is based on their logo, so the only bit of design work I needed to do was in amending the text so it could be cut, and the centre of letters like ‘B’ and ‘A’ would be connected rather than just being holes. It’s a metre square, and framed in some chunky box section so has quite a weight to it. The unusual thing about this bespoke brewery sign is that they didn’t want any kind of finish on it – we were just supplying it in bare mild steel. We’ve also added a channel at the bottom of the sign made from 50×50 angle iron; this is because the point of the sign is to set fire to it – we suggested adding the channel to fill with parafin to keep it burning better and for longer. It’s just a bit of a promotional stunt for shows and where possible beer festivals that I think suits their image really well. It will look amazing with the flames licking up the sign & coming through the cut outs of the text and business logo! Durability of this sign is a bit of an unknown as unsuprisingly we’ve never set fire to one of our signs before, but I’d imagine that the heat of the fire will give some level of rust protection, and as it’s cut in 3mm thick steel it shouldn’t get too hot that the more delicate points on the letters melt away. We’re looking forward to seeing how they get on with it!
We finished welding this bespoke swinging sign yesterday. The design shows two Pygmy goats and a Labrador, the customer’s pets. I’ve tried to show the goats in quite a playful light, reflecting their curious and mischievious personalities, so one has climbed onto a tree stump and the other looks up to him in an inquisitive manner. The Labrador is watching over them, as usual fascinated by what his two companions are up to. It’s great to be able to personalise a hanging sign design to this extent; as well as getting the look of the animals right, from speaking to our customers we can also get an insight into how their animals interact with each other, and allow that to inform the design.
As the sign will be mounted to the top of a chunky gatepost rather than a wall or the side of a post, we’ve produced a different bracket to our standard. We’ve used 50x50mm box section for the vertical, and 30x30mm for the horizonatal bar, so is very sturdy and built to last. The hand forged scroll on top adds to the traditional look of this bespoke hanging farm sign.
A great photo of a bespoke swinging sign we produced for ‘Black Rock Farm’. When the customer initially approached us with their design idea, I wasn’t sure how well a large rock would work in silhouette form. I drew some jagged shapes which have worked well as cut outs, highlighting where light hits the rock face, which actually has turned out to be very effective. Rather than having the bracket mounting to the side of the post, as with most of our swinging signs, we suggested having the sign hanging within a frame on top of the post, as the customer had mentioned the location being on the side of a busy main road, and with a large hedge in the background. We felt this different style of hanging bracket would give the sign the extra height it needed to be noticed.
This photo shows a bespoke sign we’ve produced recently. The customer had been inspired by our popular Climbing Roses sign ( below), and wanted something similar based around Ivy and Dragonflies. These signs are cut in 3 mm steel, and consist of a backplate powdercoated black, and an ornate, laser cut front plate. This is also powder coated black, but the detail is painted by hand in cream so it stands out beautifully against the background. Producing bespoke designs in this style is quite challenging, as there is such a defined space that everything must fit into, and as a result re designs do take a while. But we’ve produced a fair few different versions of this now, and I think they’re popular because they are such a unique product – both functional and a piece of art in it’s own right. The customer who commissioned this bespoke sign also purchased a pair of brackets to compliment it (pictured above). This style of sign would make a wonderful house warming gift for anyone who loves quirky and unique design, as they can be re designed and personalised to suit the recipient’s taste and interests.